Happy Almost Easter, fellow citizens of the stitchosphere! I’ve got something a bit more demure to show you this week, so no need to adjust the colour setting on your digital device!
A shirt! With topstitching! The Archer by Grainline Studios has been a labour of love these past weeks. After steaming through a cluster of Bonnies and trousers, I relished taking on a project that involved numerous steps, each taken lovingly and slowly. I dialled up the Archer Sewalong, and settled in with laptop beside sewing machine and overlocker to be led through the construction. I used cotton chambray from Classic Textiles on Goldhawk Road, which was a bargainous £3 per metre. The fabric pressed easily and behaved beautifully, so it was easy to be accurate. I used a water soluble fabric marker, which you can see around the buttonholes on the photos. Overall, it was a pleasure to sew with. I went back to the textbook and used the used the overlocker to finish seams inside. As recommended, I pressed the seams to one side and topstitched along the seams on the right side to mimic the flat-fell seams typically found on a denim or chambray shirt.
After a bit of research on collars, I decided to follow Four Square Wall’s tutorial for assembling in a different order for a more accurate finish. I’d recommend it – I was really pleased with the way it went in.
So far, so good. It was all going so well until it was time to stitch the button holes. I felt the anxiety levels rising – I had a few dry runs then went for it! After five perfect buttonholes, you guessed it – it went mad on hole number six, and got stuck. What a mess! It’s not too noticeable. But then things got worse: I cut through the top buttonhole with the stitch ripper!
And then…. I realised i’d put the buttonhole on the wrong side of the cuff, so had to stitch it back together and add a buttonhole to the other side! So after ten long days of tender loving stitching i sabotaged the shirt with my finishing touches. Isn’t it always the way?